Pico 10"

Pure class A - vintage - tone for classic jazz-, blues- or rock- tones with a rich and powerful sound, despite of the compact dimensions and 10" speaker.

  • Pico10 vv per 2771 1680
    Pico 10"
  • Pico10 vh 2779 2863
    Pico 10" rear view
  • Pico10 vo 2747 1546
    Pico 10" from above / operation panel
  • Pico10 vo Detail 2751 3333
    Pico 10" detail controls

3 simple controles (Volume, Tone & Reverb) and 2 inputs (Low & High) for various, warm vintage sound - possibilities. With the guitar-volume you can turn down from rich crunch to clean - whereby the volume-relations will stay in an optimal region with no loss of tone-quality.

Despite of the small dimensions, but because of its sophisticated construction and the power of 8W Pico achieves a powerful, voluminous tone which will be sufficient even for club gigs.

Because of the a bit more output volume of the 10" speaker (against the 8" in the other Pico model), here you can switch the max. power from 8W to 4W to get a bit more quiet tone when used with higher gain / overdrive.

Also all sorts of preceded booster-, distortion- &/or other effect pedals can be used without any troubles.

Review Gitarre & Bass magazine of 8"-Pico with sound files

Videos see Playlist plus one from MusikRaum on Facebook

detailled specifications:

Sound-forming

  • The Tone control influences the bass/treble ratio very efficiently and well-balanced.
  • The Bright switch brings more brilliance or more twang, depending on the position of the Volume control.
  • Depending on your sound-idea (really clean, twangy or crunchy) you can virtually influence the gain via Volume control.
    And via Tone control (situated prior to the Volume in the circuitry) you can choose which frequencies are crunched more - e.g. basses less and treble more.
  • From a certain position of the Volume you'll get nice harmonic saturation of the power tube (added to the preamp distortions) at a bearable sonic level.
  • Reverb circuit (footswitchable) controls the TAD™ spring reverb.

Tubes

  • Preamp: 1x Electro Harmonix 12AX7 & 1x JJ ECC83S.
  • Poweramp: 1x KT66 (TAD or JJ). All Tubes can be replaced any time with no adjustments needed (Auto-Bias).

internal Speaker

  • Jupiter 10", 8 Ohm, 25W: actually surely the best remake of the acclaimed vintage speakers from the beginnings of guitarampslification

external Speaker

  • can be connected at the internal socket. Impedance 8 ohms.

Accessoirs